There are many customers who do not pay attention to the protection of the building template after they buy the building template, so there may be problems in the use process. So how to protect the building template?Let's make it a little smallerAnalysis on it.

The construction template made by the manufacturer of building diaphragm plate shall be protected before use. After using the building template, it shall also be checked whether it is qualified for installation.The following six points should be noted:

1. When supporting the circular beam template on the brick wall, prevent the collision of the top leather brick and protect the steel bar from disturbance.

2. After supporting the template, the mold should be kept clean to prevent falling into bricks, stones, wood chips and other debris.

3. Brick extrusion and deformation of the external wall at the structural column: reinforcement measures should be taken on the external wall when supporting the template.

4. External expansion of the ring beam template: the support of the ring beam template is not clamped, the support is not firm, and the pull rod at the top of the template is damaged or not nailed firmly.No one fixed the template when pouring concrete.

5. Concrete flow drop: too large seam of the template plate is not glued with fiberboard, plank, etc.

6. The outer wall ring beam is not first supported by formwork and then poured with circle-beam concrete. Instead, it is covered with bricks instead of supporting formwork and then poured with concrete, causing the cement mud to flow down through the cracks of bricks.

We need to take the above protective measures in the process of use, so as to make the building template play a better role and save us from unnecessary troubles.