With its advantages of good quality, good abrasion resistance and strong support, building templates have become the main force of modern construction industry, supporting the development of construction industry.The assessment of building templates is not only about saving resources. Qualified building templates should also meet the following standards:

　　1, building formwork support system should be able to keep the building template vertical placement of safe and reliable under wind load and its stability, lower margin adjustment bolt length should satisfy regulating template installed verticality and adjust the Angle of need, the anchor should be adjusting device to facilitate adjustment and flexible rotation.

2. The building template shall be composed of panel system, support system, operating platform system and connectors, etc. The connection between the building template systems must be safe and reliable.

3, building templates panel should choose thickness of not less than 5 mm steel plate production, the template of the rib and back stare blankly is made of steel and cold bending thin-wall steel material appropriate and steel panel in the same brand, to ensure the welding performance and structural performance.

Building film face plywood manufacturers to control has an important influence in the quality of engineering, so the production process of building the template requirement is very strict, so to be qualified to do the above mentioned several standard.