The development of the construction industry is in full swing. In the process of construction, the group of building templates is related to the quality of the whole project.The construction template shall be spliced into a whole in strict accordance with the size of the template layout drawing, and then inspected by a third party quality inspection agency.

When the template is spliced in the project site, the gap between two adjacent templates should be strictly controlled, and the clamping clamp should be strengthened at the end of the clamping between two plates.Then, after the assembly is completed, the steel wire is used to tie it tightly to the vertical steel pipe.Only in this way can the overall stability of the template be guaranteed and the later engineering safety be ensured.

Because the small steel die was not assembled in accordance with the requirements, the overall instability of the building template and deformation.The initial waterproof system is not well constructed, and the foundation may sink or tilt sideways. It is also possible that the foundation where the template is placed is unstable, which will lead to the deformation of the building template.

In the process of construction in order to catch up, pouring concrete walls, column too fast, without its full set, the height of a casting is too high, vibrating excessively rapid will lead to building template variants.