In high building template engineering construction process, in strict accordance with the architectural template construction engineering quality control program, in addition to some quality common fault prevention measures, nip in the bud, to ensure the construction quality of construction template.Strict implementation of the turning-over system, linyi building template factory remind operation must have a single construction plan and the written form of technology to the construction team.

1. Select unified specification for plywood, smooth, clean and waterproof.

2. The wooden side in the entrance shall be planed, straightened and uniform in size, with the code neatly arranged, and the wooden side shall be padded at the bottom.

3. Planing the four sides of the template with elastic line to ensure that the positive Angle of the wall, pillar and floor is straight.

4, wall template installation leveling at the grass-roots level, and paste the sponge, the lower template and do the positioning base on tight in advance, and to get accurate location template and prevent leak slurry at the bottom of the template, in front of the wall to continue installation template, to set up the template support pad, and correction of the flat.

5. The buttress bolt hole of the wall template is flat and straight, and the penetration bolt shall not pull the hard top sideways.The inner wall is bolted with rigid plastic pipe, and the length of plastic pipe is 2~3mm less than the wall thickness.

6. The size of the template for the opening of doors and Windows is required to be accurate. After correcting the square back of the positive Angle, it is strengthened and fixed.

7. Horizontal support and scissors support for the support shall be arranged according to the structure and overall stability.