Building template is a kind of temporary supporting structure, it according to the design requirements, in accordance with the provisions, the location of the concrete structure, components, the geometry shape, keep support correct position, and its role on its weight and external load.And this kind of template will be affected by all aspects of the deformation phenomenon.So what should be done about this?

                 （Monolithic building）

     1, building templates and support system design, should give full consideration to its own weight, construction load and when the concrete is poured concrete complacent and lateral pressure, to ensure that the template and bracket have enough bearing capacity, stiffness and stability.And pay attention to the bottom of the beam span should be able to guarantee the concrete weight and do not produce deformation under construction load, support for mud at the bottom of the foundation, should be carefully ramming, drains, and laying length mat wood or steel, to ensure that don't support subsidence.

2. During the construction of wooden building template and plywood template, concrete should be poured in time after receiving qualified experience to prevent the deformation of wooden template from long-term exposure to rain.

3. For cast-in-place reinforced concrete beams and slabs whose span is not less than 4m, the construction template shall arch according to the design requirements. When there is no specific design requirement, the arch height should be 1/1000-3/1000 of the span.In addition, when assembling small steel mould, the connecting parts shall be placed according to the regulations, and the enclosing purlin and the distance and specification of the drawing bolt shall be set according to the design requirements.